Automatic Cone Tapered Aluminum Flagpoles by Acme/Lingo
Automatic flagpoles will raise the flag at daybreak and lower it at sunset. This unique motorized flagpole is controlled by a photocell which enables automatic dusk to dawn operation. When the flag is lowered, it enters the flagpole through a cast aluminum entry. Once inside, the flag is protected from the weather. With the manual override, the flag can be lowered to half staff or stored inside the flagpole during inclement weather. If you have more than one flagpole, we can engineer them to operate simultaneously.
The electronic automatic flagpole comes equipped with a specially designed light weight American flag. These custom flags have a special heading that allows there use with the Automatic flagpole. The flags are attached and replaced through the motor access door. The truck assembly is cast aluminum and welded to the pole top. The halyard is a stainless steel cable and has two delrin flag holders along with two up/down motor stops. The 120 volt motor is mounted inside the lower portion of the pole and there is a large access door for maintenance. All poles are flange mounted and installed on four partially galvanized anchor bolts. Nut covers are provided as well.
The standard finish is a satin polished finish. Optional finishes include Clear Anodized, Bronze Anodized or powder coat paint in choice of standard colors. See our finishes page for more information.
- Manual hand crank system
- Multiple flag set up on poles over 30′ tall
|Flag Size Max|
|30′||7″||4″||.188″||5’x8′||4’x6′ & 3’x5′||n/a|
|35′||7″||4″||.188″||5’x8′||5’x8′ & 3’x5′||n/a|
|40′||8″||4″||.188″||6’x10′||5’x8′ & 4’x6′||6’x10′ & 3’x5′|
|45′||8″||4″||.188″||6’x10′||5’x8′ & 4’x6′||6’x10′ & 3’x5′|
|50′||8″||4″||.188″||6’x10′||5’x8′ & 4’x6′||6’x10′ & 3’x5′|
|60′||10″||4″||.250″||6’x10′||5’x8′ & 4’x6′||6’x10′ & 3’x5′|
|60′||12″||4″||.250″||6’x10′||5’x8′ & 4’x6′||6’x10′ & 3’x5′|
|70′||12″||4″||.250″||6’x10′||5’x8′ & 4’x6′||6’x10′ & 3’x5′|